Conforto
TS 1.1–2.2 kW
Conforto TS
High-head submersible drainage pump, 1.1–2.2 kW
Official partnerConforto TS are two-pole submersible drainage pumps with a head of up to 24 m — the highest in the Conforto drainage range. They are used in handcraft workshops and industry to dispose of clean or slightly dirty water, to lift fluids from tanks and rainwater traps, cellars and to dry out underpasses. They are made of G20 cast iron (motor cover and casing, pump body, impeller) with an AISI 416 stainless steel shaft and a silicon carbide/alumina mechanical seal.
Features
- The highest head in the drainage range — up to 24 m
- Build entirely of G20 cast iron
- AISI 416 stainless steel shaft
- Silicon carbide/alumina mechanical seal
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
- Thermal microswitch set at 130 °C
- 10 m of H07 RN-F cable with a Schuko plug (single-phase)
Applications
Handcraft workshopsIndustryTanks and rainwater trapsCellars and underpasses
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesTS (M — single-phase, T — three-phase)
TypeHigh-head submersible drainage pump
Power1.1 – 2.2 kW (1.5 – 3 HP)
Maximum head24 m
Maximum flow rate33.3 m³/h (554 l/min)
Max. particle size7 mm
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
Outlet2"
Cable10 m H07 RN-F
Weight32 – 36 kg
Available modelsTS 150/50, 200/50, 300/50 (M/T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.