Conforto
FH 0.55–2.2 kW
Conforto FH
High-flow submersible drainage pump, 0.55–2.2 kW
Official partnerConforto FH are two-pole submersible drainage pumps with the highest flow rate in the range — up to 58.5 m³/h. They pass solids from 15 to 25 mm. They suit lifting fluids from tanks and rainwater traps, cellars, drying out underpasses and fountains. Seven sizes, including R versions with a more compact body. They are made of G20 cast iron, with an AISI 416 stainless steel shaft and oil-resistant nitrile rubber gaskets.
Features
- The highest flow rate in the range — up to 58.5 m³/h (975 l/min)
- Solids from 15 to 25 mm
- Seven sizes, including compact R versions
- Build entirely of G20 cast iron
- AISI 416 stainless steel shaft and stainless steel screws
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
- Thermal microswitch set at 130 °C
Applications
Tanks and rainwater trapsCellars and underpassesFountainsIndustry
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesFH (M — single-phase, T — three-phase)
TypeHigh-flow submersible drainage pump
Power0.55 – 2.2 kW (0.75 – 3 HP)
Maximum head19 m
Maximum flow rate58.5 m³/h (975 l/min)
Max. particle size15 – 25 mm depending on the model
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
Outlet1" 1/2 – 2"
Cable10 m H07 RN-F
Weight16.5 – 30 kg
Available modelsFH 80/40, 100/40, 150/50 R, 150/50, 200/50, 300/50 (M/T), FH 200/50 R (T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.