Conforto
S 0.37–2.2 kW
Conforto S
Submersible drainage pump for clean water, 0.37–2.2 kW
Official partnerConforto S are two-pole submersible drainage pumps for clean and slightly dirty water containing solids of up to 7 mm. They suit lifting fluids from tanks and rainwater traps, cellars and drying out underpasses. Six sizes cover flow rates of up to 54 m³/h. They are made of G20 cast iron (motor cover and casing, pump body, impeller), an AISI 416 stainless steel shaft, stainless steel screws and oil-resistant nitrile rubber gaskets.
Features
- Six sizes — from 0.37 to 2.2 kW
- Flow rate of up to 54 m³/h (900 l/min)
- Build entirely of G20 cast iron
- AISI 416 stainless steel shaft and stainless steel screws
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
- Thermal microswitch set at 130 °C
- Threaded and DN 50 flanged outlets
Applications
Tanks and rainwater trapsCellars and underpassesHandcraft workshopsIndustry
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesS (M — single-phase, T — three-phase)
TypeSubmersible drainage pump for clean water
Power0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head19 m
Maximum flow rate54 m³/h (900 l/min)
Max. particle size6 – 7 mm
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
OutletThreaded 1" 1/4 – 1" 1/2 or DN 50 flange
Cable5 – 10 m H07 RN-F
Weight11.7 – 37.2 kg
Available modelsS 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), S 300/50 (T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.