Conforto
FL 0.37–2.2 kW
Conforto FL
Submersible drainage pump for slightly dirty water, 0.37–2.2 kW
Official partnerConforto FL are two-pole submersible drainage pumps for clean and slightly dirty water, passing solids from 11 to 29 mm depending on the model. They suit lifting fluids from tanks and rainwater traps, cellars, drying out underpasses and fountains. Six sizes cover flow rates of up to 54 m³/h. They are made of G20 cast iron, with an AISI 416 stainless steel shaft and oil-resistant nitrile rubber gaskets.
Features
- Solids from 11 to 29 mm depending on the model
- Six sizes — from 0.37 to 2.2 kW
- Flow rate of up to 54 m³/h (900 l/min)
- Build entirely of G20 cast iron
- AISI 416 stainless steel shaft and stainless steel screws
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
- Threaded and DN 50 flanged outlets
Applications
Tanks and rainwater trapsCellars and underpassesFountainsIndustry
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesFL (M — single-phase, T — three-phase)
TypeSubmersible drainage pump for slightly dirty water
Power0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head19 m
Maximum flow rate54 m³/h (900 l/min)
Max. particle size11 – 29 mm depending on the model
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
OutletThreaded 1" 1/4 – 1" 1/2 or DN 50 flange
Cable5 – 10 m H07 RN-F
Weight11 – 36 kg
Available modelsFL 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), FL 300/50 (T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.