Conforto
TR 1.1–2.2 kW
Conforto TR
Submersible grinder sewage pump, 1.1–2.2 kW
Official partnerConforto TR are two-pole submersible grinder pumps for lifting civil and industrial wastes, slaughterhouse waste, stables and sewers. The grinder system cuts the solids and pumps them along with the liquid, which keeps the pipework clean; anything too large to pass the cutter is rejected by the grinder itself. The grinder is made of hardened stainless steel, the body of G20 cast iron and the shaft of AISI 416 stainless steel.
Features
- Grinder made of hardened stainless steel
- Cuts the solids and keeps the pipework clean
- Three-channel impeller
- Head of up to 24 m
- Ceramic/graphite upper seal, silicon carbide lower seal
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
- Thermal microswitch set at 130 °C
Applications
Civil and industrial wastewaterSewersSlaughterhousesStables and livestock farming
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesTR (M — single-phase, T — three-phase)
TypeSubmersible grinder sewage pump
Power1.1 – 2.2 kW (1.5 – 3 HP)
Maximum head24 m
Maximum flow rate16.8 m³/h (280 l/min)
Max. particle size7 mm (after the grinder)
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealUpper ceramic/graphite, lower silicon carbide
Connections and supply
Outlet2"
Cable10 m H07 RN-F with free terminals
Weight32 – 36 kg
Available modelsTR 150/50, 200/50, 300/50 (M/T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.