Conforto
FPX 0.37–1.5 kW
Conforto FPX
AISI 304 submersible dirty-water pump, 0.37–1.5 kW
Official partnerConforto FPX are submersible pumps for clean or dirty water, made entirely of AISI 304 stainless steel, which also makes them suitable for aggressive media. They are used in handcraft workshops and industry. They pass solids of up to 50 mm. The mechanical seal is made of silicon carbide/alumina, and the top seal is a lip (oil) seal. The motor is immersed in a dielectric anti-oxide oil bath and is cooled by the pumped fluid itself.
Features
- Made entirely of AISI 304 stainless steel
- Also suitable for aggressive media
- Solids of up to 50 mm
- Silicon carbide/alumina mechanical seal
- Fully watertight motor — IP68 protection rating
- Single-phase models with a thermal microswitch against impeller blocking
- 10 m of H07 RN-F cable with a Schuko plug (single-phase)
- Light build — from 6 kg
Applications
Handcraft workshopsIndustryAggressive mediaPumping dirty water
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesFPX (M — single-phase, T — three-phase)
TypeAISI 304 submersible dirty-water pump
Power0.37 – 1.5 kW (0.5 – 2 HP)
Maximum head14 m
Maximum flow rate27 m³/h (450 l/min)
Max. particle size20 mm (50/32) / 40 mm (80/40) / 50 mm (100/50 and above)
Operating conditions
Max. liquid temperature50 °C (continuous duty)
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialAISI 304 stainless steel
Body materialAISI 304 stainless steel
Shaft materialStainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
OutletThreaded 1" 1/4 – 2"
Cable10 m H07 RN-F
Weight6 – 13 kg
Available modelsFPX 50/32, 80/40, 100/50, 150/50, 200/50 (M/T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.