Conforto
FP 0.37–2.2 kW
Conforto FP
Submersible dirty-water pump, 0.37–2.2 kW
Official partnerConforto FP are two-pole submersible pumps for clean or dirty water, passing solids from 25 to 45 mm depending on the model. Six sizes cover flow rates of up to 48.6 m³/h. They are used in handcraft workshops and industry, for lifting fluids from tanks and rainwater traps, cellars and drying out underpasses. They are made of G20 cast iron, with an AISI 416 stainless steel shaft, stainless steel screws and oil-resistant nitrile rubber gaskets.
Features
- Solids from 25 to 45 mm depending on the model
- Six sizes — from 0.37 to 2.2 kW
- Flow rate of up to 48.6 m³/h (810 l/min)
- Build entirely of G20 cast iron
- AISI 416 stainless steel shaft and stainless steel screws
- Silicon carbide/alumina mechanical seal
- Operation up to 60 °C continuous and up to 90 °C intermittent
- Fully watertight motor — IP68 protection rating
Applications
Pumping dirty waterTanks and rainwater trapsCellars and underpassesShipbuilding and industry
Technical specifications
Key parameters
ManufacturerConforto (Italy)
SeriesFP (M — single-phase, T — three-phase)
TypeSubmersible dirty-water pump
Power0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head12 m
Maximum flow rate48.6 m³/h (810 l/min)
Max. particle size25 – 45 mm depending on the model
Operating conditions
Max. liquid temperature60 °C continuous / 90 °C intermittent
Max. fluid density1100 kg/m³
Min. pumping level10 cm above the pump body
Voltage (single-phase)230–240 V, 50 Hz
Voltage (three-phase)230/400 V, 50 Hz
Protection ratingIP68
Insulation classF
Materials
Impeller materialG20 cast iron
Body materialG20 cast iron
Shaft materialAISI 416 stainless steel
SealMechanical, silicon carbide/alumina
Connections and supply
OutletThreaded 1" 1/4 – 2"
Cable5 – 10 m H07 RN-F
Weight11 – 36 kg
Available modelsFP 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), FP 300/50 (T)
Need professional advice?
Our specialists will help you choose the right pump for your needs.